BMW E92 Multi-Color Halo Angel Eyes Installation Instructions

Installing Tips:

1) Inspect and test your kit prior to installing. We test every product before it goes out our door. You should be good to go! If any thing is not working, best to contact us before taking your headlights apart.

2) Have a beer waiting for you at the end to celebrate.

3) These Multi-Color Kits use an RF (RADIO FREQUENCY) wireless remote, we recommend you place the RF receiver (RGB Control Box) near the front grille so you can stand in front of the car using the remote control. Also Install RF Receiver (RGB Control Box) away from heat of engine. NOTE: These are RGB rings, the white color is mixed with Red + Green + Blue, therefore it is not exact "White" like our single color 7000k white LED Halo-Angel Eye kits.

Tools Required: Phillips Screw Driver (corner lamps) • Flat Head Screw Driver (optional for headlight cover) • Pliers (handy to have to crimp Wire Tap Connector) • Electrical Tape • 10mm Socket or Adjustable Wrench (ground nut, coolant reservoirs, positive battery terminal) • T25 Torx Bit (ECU box cover)

Click here for Video How-To Link (which is on our BMW E92 Product Page): http://www.shop.kinobilighting.com/BMW-E92-Changeable-Multi-Colors-LED-Halo-Angel-Eye-Rings-kit-E92COLOREYES124X.htm

13 - 13 of 13 items
Sort By:
13 - 13 of 13 items